All Jacks, skates and rollers articles – Page 3
-
NewsTecnogruas lifts with Enerpac gantry
Chile-headquartered heavy lift contractor Tecnogruas has lifted a Liebherr Mobilmix 2.25 horizontal mixing plant using an Enerpac SBL500 hydraulic gantry.
-
NewsFagioli uses Cometto equipment for jack-up system
Italian heavy logistics specialist Fagioli has installed a jack-up system onto the deck of self-propelled Cometto SPMTs.
-
NewsCometto shifts railway bridge
Cometto’s SPMTs were deployed to assist in the positioning of an arch bridge as part of a railway expansion project in Luxembourg.
-
NewsBovis lifts with Enerpac cube jacks
Heavy equipment handler Bovis Group, in collaboration with equipment installer Trinstal Equipements, has installed two 16-tonne presses using Enerpac cube jacks.
-
NewsHuisman moves forward with jacking system
Huisman has completed a factory acceptance test (FAT) for its jacking gearbox that will be part of a jacking system for the offshore renewable energy market.
-
NewsEnerpac adds battery-powered skates
Equipment manufacturer Enerpac has added an EMLS/EMV series battery-powered machine skate for moving heavy industrial machinery in confined spaces.
-
NewsEnerpac adds SBL600
Equipment manufacturer Enerpac has added the SBL600 to its range of SBL-Super Boom Lift hydraulic gantry range.
-
NewsMammoet on hand for ACE project
Mammoet has delivered heavy and oversized modules for the Azeri Central East (ACE) project – the latest phase of development of the Azeri-Chirag-Deepwater Gunashli (ACG) field, which is located in the Azerbaijani sector of the Caspian sea and operated by bp.
-
NewsOsprey adds Enerpac JS250 to portfolio
UK-based Osprey Group will expand its fleet of equipment with the addition of an Enerpac hydraulic jack system.
-
NewsMammoet removes Lingen cargoes
Mammoet has removed two steam converters, weighing approximately 155 tonnes each, from the control area of the Lingen nuclear power plant in Germany.
-
NewsSarens installs 21,000-tonne topside
Belgian transport engineering and heavy lift specialist Sarens has utilised eight CS5000 jacking units to move, weigh and jack a 21,000-tonne CPP topside module for the Kasawari gas development project in Johor, Malaysia.
-
NewsMKK in turbine installation
Bangladesh-based MKK Logistics has used an Enerpac SBL900 hydraulic gantry crane to install a 130-tonne turbine at a 718 MW combined-cycle power plant at Meghnaghat in Dhaka.
-
NewsWagenborg Nedlift receives heavy jacking system
Wagenborg Nedlift has taken delivery of an ultra-heavy jacking system.
-
NewsBarnhart assists with Gerald Desmond Bridge removal
Barnhart Crane & Rigging worked with Kiewit Corporation to remove the main span of the Gerald Desmond Bridge in Long Beach, USA.
-
NewsMammoet opens Cocoa yard
Mammoet has opened a full-service 2-acre (0.8-ha) yard in Cocoa, Florida.
-
NewsEngineered Rigging in bridge success
Engineered Rigging has supported contractor Bush and Burchett with the construction of the Pond Creek Bridge in Kentucky, USA.
-
NewsEnerpac cylinders on show
To support the build of a new joint support ship (JSS), the team at the Vancouver-based Seaspan shipyard deployed an Enerpac EVO synchronous lifting pump and 12 high-tonnage hydraulic lifting cylinders.
-
NewsEngineered Rigging equipment used for engine move
During Q4 2021, TIBA Group deployed equipment from Engineered Rigging to move three locomotive engines at Chile’s Terminal Cerros de Valparaíso (TCVAL).
-
NewsSyncHoist system deployed in Paris
An Enerpac SyncHoist system is being used for the installation of concrete beams across rail tracks in the eastern part of Paris.
-
NewsEngineered Rigging buys JS500 jack up
Arkansas, USA-based Engineered Rigging has acquired an Enerpac JS500 jack up system and is accepting rental reservations.